1. The truck-mounted drilling rig is available in diesel engine drive, with optimized power matching, high transmission efficiency, and excellent reliability. The overall structure is compact, with a high degree of modularization and a small footprint.
2. The rig uses a custom-made heavy-duty carrier equipped with a hydraulic power steering system, with excellent mobility, off-road capability, and lateral stability.
3. The primary brake system consists of a band brake or hydraulic disc brake, while the auxiliary brake system includes pneumatic thrust disc brakes and pneumatic caliper disc brakes or hydromatic brakes.
4. The mast is a front-opening, double-section telescoping mast, available in inclined or upright configurations. It is equipped with hydraulic cylinders for lifting and extending, along with anti-wind guy ropes and anti-tipping guy ropes.
5. The rotary table drive system enables forward and reverse rotation, engagement, and disengagement of the rotary table, and it is equipped with a torque release device to safely release the torque on the drill string.
6. The drill floor uses a telescoping or rotating lifting structure, with flip-type side cantilevers. The entire skid can be hoisted and transported as a complete unit. The drill floor deck height, dimensions, and layout can be customized as required.
7. The drilling rig is equipped with a complete set of ancillary equipment, including a solids control system, well control system, high-pressure manifold, mud pump units, and oil-water tanks. These components can be flexibly matched and customized according to specific requirements.
Technical Parameters
| Product model | ZJ10/900Z |
| Maximum hook load kN | 900 |
| Nominal drilling depth (114 mm) m | 500～1000 |
| Drawworks power kW | 261 |
| Number of drilling lines in the traveling system | 6 |
| Diameter of drilling lines mm | 26 |
| Mast height m | 29，31 |
| Maximum hook speed m/s | 1.5 |
| Drill floor height m | 4 |
| Rotary Table Opening Diameter mm | 444.5 |
| Main brake | Band brake, disk brake |
| Auxiliary brake | 224WCB |
| Carrier vehicle model | XD40/8×6 |
| Minimum ground clearance mm | 311 |
| Minimum turning diameter m | 28 |
| Emission standard | National V |
The items marked with * are non-preferred parameters.
